| Description |
Range of low profile in-line mixed flow duct fans manufactured in tough reinforced plastic (from 160 to 800 models) or with metal casing steel finished in a tough epoxy-polyester paint coating(from 1000 to 6000 models).
The unique design of the support bracket allows the motor and impeller assembly to be fitted or removed without dismantling the adjacent ducting. |
| |
| Motors |
| |
160 – 2000 models:
Motors are IP44, class B, with ball bearings and safety thermal overload protection.
Direct 2-speed connection and also suitable for voltage speed control.
Electrical supply:
- Single phase 230V 50/60Hz.
4000 and 6000 models:
Motors are IP54, class F, with ball bearings and safety thermal overload protection. Suitable for voltage speed control.
Electrical supply:
- Single phase 230V 50/60Hz.
|
| |
| Additional Information |
| |
| MIXVENT TD-T models fitted with a Run-On-Timer adjustable within 1 and 30 minutes and one-speed motor not suitable for speed control. |
| |
 |
|
| Low profile |
| |
| The low profile of the MIXVENT-TD fans makes them the most effective solution for installations where the space of installation is limited such as false ceilings. |
|
| |
 |
|
|
| |
 |
|
| Easy maintenance |
| |
| The unique design of the support bracket allows the motor and impeller assembly to be fitted or removed without dismantling the adjacent ducting |
|
| |
 |
|
| Flexible mounting position |
| |
| Can be placed at any part of the air duct |
|
| |
 |
|
| Models with Run-On-Timer |
| |
MIXVENT-TD-T models (from 160 to 800 models) are fitted with an adjustable timer between 1 and 30 minutes
and are supplied with a one-speed motor not suitable for speed control |
|
|
Fans
