The HXM plate mounted axial flow fans are manufactured from pressed galvanised steel and protected from corrosion by a beige epoxy-polyester paint finish.
All models include a steel finger proof guard as standard mounted to the inlet side of the fan.
Impellers are manufactured from galvanised steel sheet and finished with black polyester paint. |
| |
| Features |
| |
| |
| |
Single phase speed controllable motor 230V-50Hz for usage in enviroments up to +40ºC, equipped with thermal protection HXM-200 to HXM-350.
Shaded pole asynchronous induction motor.
IP40, Class B insulation, with sleeve bearings.
Flexible cable for connection to the electrical supplies.
HXM-400: External rotor motor, IP44, Class F insulation, with ball bearings greased for life. Provided with a wiring terminal box. |
| |
| Additional Information |
| |
| |
| |
Standard air direction: form (A) configuration
(Motor over Impeller). |
| |
 |
|
| Provided with cable for connection to the electrical supplies |
| |
| Motor protected from corrosion by epoxy-polyester paint finish. Cable to ease connection to electrical supplies (except for HXM-400 model) |
|
| |
| |
| |
 |
|
| HXM-400 model terminal box |
| |
| Wiring terminal box including the capacitor |
|
|
Fans
