|
| Description |
| |
| |
| |
Range of low profile plate mounted axial fans fitted with aluminium impellers.
Available, depending upon the model, with single or three phase motors in 2, 4, 6 or 8 poles. |
| |
| Motors |
| |
| |
| |
All the motors are IP65(1), Class F insulation(2), equipped with thermal protection. All motors are speed controllable except 2/315/H, 2/355/H and /4-630, /4-710, 800, 900, 1000 models.
Electrical supplies:
- Single phase 230V-50Hz. (Capacitor located inside the wiring terminal box)
- Three phase 230/400V-50Hz or 400V-50Hz
(See characteristic chart.)
(1) 2/315/H,2/355/H and 800, 900 & 1000 models are IP55.
(2) Working temperatures from -40ºC up to 70ºC (except /2-315/H,/2-355/H, 800, 900 and 1000 models: suitable for usage in environments up to +40ºC). |
| |
| Additional Information |
| |
| |
| |
Standard air direction: form (A) configuration
(Motor over Impeller).
On request:
Air direction: form (B) configuration (Impeller over Motor).
Three phase motors suitable for inverter control (E22 version).
Inlet finger proof guard for models 800 to 1000.
Explosion proof versions in accordance to ATEX Directive for three phase models:
- Increase safety Ex II2G EExe IIT3 (except 2 pole motors).
- Flame proof only for models 800 to 1000,
Ex II2G EExd IIBT5 or EExd IICT4.
- Working temperatures up to 40ºC
|
| |
 |
|
| Compact design |
| |
| Compact design created by the combination of the motor with the factory matched direct drive wrap around impeller hub. |
|
| |
| |
| |
 |
|
| Corrosion resistance |
| |
| Mounting plate, motor support and finger proof guard protected by cataforesis primer and black polyester paint finish. Stainless steel screws |
|
| |
| |
| |
 |
|
| Terminal box |
| |
| Wiring terminal box with cable gland PG-11 |
|
| |
| |
| |
 |
|
| Impeller dynamically balanced |
| |
| According to ISO 1940 standard, giving vibration free operation |
|
| |
| |
| |
 |
|
| Configuration for models Ø 800 to 1000 |
| |
| |
|
|
|
Fans
